News

Firepales with air intake.


Date Added: 25/02/2014

Fireplaces and smoke.


Date Added: 22/02/2014

Fireplace with hot air system.


Date Added: 14/01/2014

Wood should be dry, maximum 20 % moisture.


Date Added: 20/12/2013

Kamīni ar siltuma akumulāciju ir diezgan izstiepts jēdziens, jo siltuma akumulācija laiks var tik variēts no 2 stundām līdz diennaktij, un pat 36 stundas. Viss ir atkarīgs no akumulācij …

Date Added: 27/06/2012

Fireplace Romotop insert HEAT 70.50.01( H2Z 01 )

Fireplace Romotop insert HEAT 2g 70.50.01
Fireplace Romotop insert HEAT  70.50.01( H2Z 01 )
Manufacturer:
Product:
HEAT 70.50.01 ( H2Z 01 )


Price: € 1,120.00 € 990.00
We sell only in LV!
Download technical information PDF
• Romotop DOUBLE SPIN special flue gas system
• CAI (central external air supply)
• Designed to operate in convection, as well as accumulation mode 
• cast iron grill 
• ash pan
• chamotte combustion chamber
• adjustable legs
• glass with silkscreen printed decor 
• door frame is made of a special rigid rolled profile
• you can add a construction frame
• wood length 500 mm
• meets the following standards: EN 13 229, DIN +, 15a B-VG as from 2015. year, Bimsch V 1/2, Czech Republic Clean Air Act
The insert can be equipped with accumulation plate kit
 
and accumulation ring kit
 
Height 1006 mm
Width 699 mm
Depth 541 mm
Weight 170 kg
Adjustable power 5.0-12.0 kW
Chimney connection diameter 150 mm
Outside air connection diameter 120 mm
Draft 12 Pa
Heat output coefficient 80 %
Average fuel consumption 2,7 kg/h

Chamotte

Homogeneous material with constant and repeatable characteristics.

A special balance between insulation and thermal conductivity. In cold conditions, high reflection in the combustion chamber. In hot conditions, perfect thermal management for heat memory system. Chamotte is constantly being developed. The last change was made earlier this year. The smooth surface gives virtually no contact with the unburned material. High temperature resistance up to 1200 °C Only white Chamotte represents clean combustion at high temperatures. Fast and high combustion temperature for clean combustion and low emissions combustion and clean glass.

Chamotte cracks
Microcracks in the Acumotte is nothing to worry about, it does not significantly affect the efficiency. Chamotte is subjected to high thermal stress of 20 ° C - 700 ° C; during combustion the temperature is modulated between 200 ° C-700 ° C depending on the combustion conditions. Chamotte has to be replaced, if it has cracks and Chamotte is no longer in its previous position.

Lesions appear through:
- Physical force
* Firewood is thrown with force in the loading time;
* Using the wrong fueling material;
* Significant changes in the interior lining.

- Wrong treatment of a new insert of oven 
* The first fireplace insert's or oven's firing should happen slowly; 
* New Acumotte attachment contains from 1-1,5 l combined water, which must slowly dissipate from Acumotte;
* 1. Burning with 1 kg small, dry wood; 2. Firing with 2 kg wood: 3. Fire with a nominal heat output and loading. 

 

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:





Kamīni no Norvēģijas © 2019